~~NOTOC~~ 

   
====== Zmod AWG ======
   
{{Digilent Infobox
| Store Page = https://digilent.com/shop/zmod-awg-1411-2-channel-14-bit-arbitrary-waveform-generator-awg-module/
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/4-fpga/
| Title = Zmod AWG
| Subtitle = SYZYGY-compatible Dual-channel 14-bit Digital-to-Analog Converter Module
| Header = Features
| Channels = 2
| Channel Type = Single-Ended
| Resolution = 14-bit
| Output Range = ±1.25 V (Low Range) \\ ±5 V (High Range)
| Absolute Resolution = 167 μV (Low Range) \\ 665 μV (High Range)
| Accuracy = ±0.2 % of Range (Typical)
| Output Impedance = 50 Ω
| Sample Rate = 100 MS/s (Real Time)
| Max AC Amplitude = ±5 V
| Analog Bandwidth = 40 MHz @ 3dB \\ 20 MHz @ 0.5dB \\ 14 MHz @ 0.1dB
| Slew Rate = 180 V/μs (2V Step)
| Header = SYZYGY™ Compatibility
| Version = Syzygy 1.1 \\ Syzygy DNA 1.1
| Compatibility Table = [[reference-manual#the_syzygy_compatibility_table|In Reference Manual]]
| Header = Physical
| Width = 45 mm
| Length = 70 mm
| 3D Model = {{:zmod:scope:zmod_awg_3d_files.zip|Zmod AWG 3D Model}}
| Header = Product Compliance
| HTC = 8473301180
| ECCN = EAR99
}}

{{page>reference-manual}} \\ \\
 

===== Getting Started =====
As of the time of writing, two different versions of the supporting materials for the Zmod AWG exist.
=== Latest Release ===
The Zmod AWG 1411 Controller is the second release of the low-level controller IP. As of the time of writing, this IP is not compatible with the AXI Adapter or Zmod Library.

For a hardware-only project demonstrating its use, see the [[/programmable-logic/eclypse-z7/demos/low-level-low-pass-filter]].
----
=== Initial Release ===
The initial release of demos for the Eclypse and Zmod AWG uses the Zmod Library to control the Zmod AWG through the Zmod DAC 1411 AXI Adapter and Zmod DAC 1411 Low Level Controller IPs.

For information on getting started with the Zmod Library, and for using these IPs, check Section 3 of the [[/zmod/zmodbaselibraryuserguide]]. These IPs and the Zmod Library are also used in demos for the USB104 A7, which you can find through its [[/programmable-logic/usb104a7/start|Resource Center]].
----
===== Documentation =====
  * [[zmod:awg:reference-manual]]
  * {{:reference:zmod:zmoddac:zmod_awg_sch_public.pdf|Zmod AWG Schematic}}

  * [[https://github.com/Digilent/vivado-library/blob/zmod/v2/2019.1-2/ip/Zmods/ZmodAWGController/docs/ZmodAWG1411_Controller.pdf|Zmod AWG 1411 Controller IP Core User Guide]]
  * [[https://github.com/Digilent/vivado-library/blob/zmod/v1/2019.1-2/ip/Zmods/AXI_Zmod_DAC1411/doc/ZmodDAC1411AxiAdapter.pdf|Zmod DAC 1411 AXI Adapter User Guide]]
  * [[https://github.com/Digilent/vivado-library/blob/zmod/v1/2019.1-2/ip/Zmods/ZmodDAC1411_Controller/docs/ZmodDAC1411LLC.pdf|Zmod DAC 1411 Low Level Controller User Guide]]

  * [[/zmod/zmodbaselibraryuserguide]]
  * [[zmod:awg:zmoddac1411libraryuserguide]]

  * [[/programmable-logic/eclypse-z7/waveforms]]

----
===== Compatible Digilent Host Boards =====
  * [[programmable-logic:eclypse-z7:start]]
  * [[programmable-logic:genesys-zu:start]]
  * [[programmable-logic:usb104a7:start]]

----
===== Tutorials =====

These tutorials step through the process of creating a hardware platform that supports the Zmod AWG 1411. Prebuilt images for the Eclypse Z7 are available on the Digilent GitHub. The process of working with these prebuilt images is documented in Section 3 of the [[zmod:zmodbaselibraryuserguide|Zmod Base Library User Guide]].

  * [[vivado:getting-started-with-ipi:start]]
  * [[learn:programmable-logic:tutorials:vivado-hierarchical-blocks:start|]]
  * [[programmable-logic:eclypse-z7:customizing-zmods-os]]
    * **Note**: //The os components needed for this guide are not available for the Genesys ZU//

----
/*
===== Example Projects =====

==Programmable Logic==



----
*/
===== Additional Resources =====

  * [[https://github.com/Digilent/vivado-library|Digilent's Vivado IP Library]]
    * //Contains IP cores supporting the Zmod AWG.//
  * {{:reference:zmod:zmoddac:zmoddac_dimensions.zip| Mechanical Drawings}}
  * {{:zmod:scope:zmod_awg_3d_files.zip|Zmod AWG 3D Model}}


----


{{tag>zmod zmod-start zmoddac resource-center}}