~~NOTOC~~  
====== OpenLogger ====== 
 
{{Digilent Infobox
| Getting Started = getting-started
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/8-scopes-instruments/
| Title = OpenLogger
| Subtitle = Wireless data logging and data acquisition device
 
| Header = Software
| WaveForms Live = [[software/waveforms-live/start | WaveForms Live]]
| Supported Browsers = Chrome, Safari, and Firefox
| Digilent Agent = [[software/digilent-agent/start | Digilent Agent]]
| Supported OSs = Windows Only

| Header = Connectivity
| Bullet = Wifi (802.11g)
| Bullet = USB 2.0 (High Speed Required)

| Header = Analog Inputs
| Channels = 8
| Resolution = 12-bit
| Sample Rate = 500 kS/s
| Bandwidth =  50 kHz
| Input Impedance = 1 MΩ
| Voltage Range = ±10V
| Max Buffer Size = 32640 Samples per channel

| Header = Function Generator
| Channels = 1
| Resolution = 10-bit
| Sample Rate = 2 MS/s
| Bandwidth = 1 MHz at -3dB
| Voltage Range = 3V peak-to-peak, ±1.5V offset
| Max Current Output = 20 mA

| Header = Power Supply
| Channels = 2
| Voltage Range = ±4 V
| Current = 50 mA per channel

| Header = Power Inputs
| Bullet = Accepts USB power (Micro B)
| Bullet = Accepts external power between 5.5 and 17 V

| Header = Pinout
| Full Row = {{ :reference:test-and-measurement:openlogger:openlogger-mz-pinout.png?direct |}}
}}


{{page>reference-manual}} \\ \\

----
===== Documentation =====

  * [[test-and-measurement:openlogger:getting-started]]
  * [[test-and-measurement:openlogger:reference-manual]]
  * [[test-and-measurement:openlogger:faq]]

---- 
===== Tutorials =====
=== WaveForms Live Instrument Guides ===

  * [[learn:instrumentation:tutorials:openlogger:instrument-panel|]]
  * [[learn:instrumentation:tutorials:openlogger:wavegen|]]
  * [[learn:instrumentation:tutorials:openlogger:datalogger|]]
  * [[learn:instrumentation:tutorials:openlogger:gpio-logic-analyzer|]]
  * [[learn:instrumentation:tutorials:openlogger:power-supply|]]
  * [[learn:instrumentation:tutorials:openlogger:math-and-cursors|]]

=== Other Tutorials ===

  * [[learn:instrumentation:tutorials:openlogger:update-firmware|]]
  * [[learn:instrumentation:tutorials:openlogger:calibration|]]
  * [[learn:instrumentation:tutorials:openlogger:wifi-setup|]]
  * [[learn:instrumentation:tutorials:openlogger:offline-support|]]
  * [[learn:instrumentation:tutorials:openlogger:cloud-logging|]]
  * [[learn:instrumentation:tutorials:openlogger:log-on-boot|]]

----

===== Accessories =====

=== Screw Terminal Adapter ===

The Screw Terminal Adapter breaks out the OpenLogger's pins to screw terminals, so that they can be attached solidly to an external circuit. \\ For more information, see the [[test-and-measurement:openlogger:screw-terminal-adapter-reference-manual|Screw Terminal Adapter Reference Manual]], and its page on the [[https://digilent.com/reference/test-and-measurement/openlogger/start?redirect=1#screw_terminal_adapter|Digilent Store]].

----
===== Highlighted Projects =====

{{topic>openlogger +project}}

----

/*
===== Academic Resources ===== 
----
*/

===== Additional Resources =====

  * [[test-and-measurement:openlogger:case-assembly-manual]]
  * [[test-and-measurement:openlogger:acrylic-case-files]]

  * [[test-and-measurement:openlogger:recover-from-corrupt-firmware]]
  * [[software:waveforms-live:how-to-convert-dlog]]

  * [[software:digilent-instrumentation-protocol:start]]
  * [[test-and-measurement:openlogger:schematic]]
  * [[https://www.microchip.com/wwwproducts/en/ATWINC1500|ATWINC1500 Wifi Radio Certifications]]
  * {{reference:test-and-measurement:openlogger:openlogger_mz_dimensions.jpg?linkonly | OpenLogger PCB Dimensions}}
  * {{https://s3-us-west-2.amazonaws.com/digilent/Software/OpenLogger+MZ/release/firmware/without-bootloader/OpenLoggerMZ-1.3.0.hex|Firmware (Without Bootloader)}}
  * [[https://digilent.s3-us-west-2.amazonaws.com/resources/instrumentation/openlogger/OpenLogger-flywire+labels-1.pdf|OpenLogger Printable Flywire Labels (PDF)]]

----
 
{{tag>legacy instrumentation start openlogger resource-center}}