~~NOTOC~~ 
     
====== Electronics Explorer ======
{{Digilent Infobox
| Getting Started = getting-started-guide/start
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/8-scopes-instruments/
| Title = Electronics Explorer
| Subtitle = All-in-one USB Oscilloscope, Multimeter & Workstation

| Header = Oscilloscope
| Channels = 4
| Sample Rate = 40 MS/s
| Bandwidth = 100 MHz
| Input Voltage = +-20 V

| Header = Arbitrary Waveform Generator
| Channels = 2
| Sample Rate = 40 MS/s
| Bandwidth = 20 MHz


| Header = Logic Analyzer / Pattern Generator
| Channels = 32
| Trigger Channels = 4
| Bandwidth = 100 MHz

| Header = Voltmeter
| Channels = 4

| Header =  Fixed Power Supply
| Channels = 1
| Output Voltage = 3.3/5 V 
| Output Current = 2 A


| Header = Variable Power Supply
| Channels = 2
| Positive Output Voltage = 0 to 9 V
| Negative Output Voltage = 0 to -9 V
| Output Current = 1.5 A

| Header = Software
| WaveForms = [[software/waveforms/waveforms-3/start | WaveForms]]

| Header = Design Resources
| Schematic = {{ :reference:test-and-measurement:electronics-explorer:electronics_explorer_f_sch.pdf |Rev. F}} {{ :reference:test-and-measurement:electronics-explorer:electronics_explorer_sch.pdf | Rev. H}}

}}

{{page>reference-manual}} \\ \\
 
===== Tutorials =====

{{topic>electronics-explorer +tutorial}}

----
===== Third Party Software Support =====
  * [[software:waveforms:waveforms-sdk:thingspeak]]
  * [[test-and-measurement:guides:matlab-getting-started]]

----
===== Academic Materials =====

  * {{ http://www.eng.auburn.edu/~nelsovp/courses/elec3040_3050 | Example of Coursework using the EE Board}} -- Created by Dr. Victor Nelson for Auburn University's Electrical System Design Lab and Embedded System Design Lab courses

----
/*===== Example Projects =====

{{topic>electronics-explorer +project}}

----*/

{{tag>legacy instrumentation start electronics-explorer ee-board resource-center}}