~~META: robots = noindex, nofollow ~~
====== JTAG Programmers ======

===== JTAG Programming Solutions Comparison Chart =====
If you want to dive deeper into the reference material for a particular programmer, click on the programmer to check out its Resource Center.

|<100% 16% 14% 14% 14% 14% 14% 14%>|
^                                                                                                                                                                                            ^  [[programmers:jtag-hs2:start|JTAG-HS2]]  \\  [[programmers:jtag-hs2:start|{{reference/programmers/jtag-hs2/jtag-hs2-0.png?100}}]]           ^  [[programmers:jtag-hs3:start|JTAG-HS3]]  \\  [[programmers:jtag-hs3:start|{{reference/programmers/jtag-hs3/jtag-hs3-kit-500.png?100}}]]                                                                                                                                                                                           ^  [[programmers:jtag-smt2:start|JTAG-SMT2]]  \\  [[programmers:jtag-smt2:start|{{jtag_smt2/smt2-obl-500.png?100}}]]         ^  [[programmers:jtag-smt2-nc:start|JTAG-SMT2-NC]]  \\  [[programmers:jtag-smt2-nc:start|{{reference/programmers/jtag-smt2-nc/jtag-smt2-nc-obl-500.png?100}}]]         ^  [[programmers:jtag-smt3:start|JTAG-SMT3-NC]]  \\  [[programmers:jtag-smt3:start|{{reference/programmers/jtag-smt3/jtag-smt3-0.png?100}}]]         ^  [[programmers:jtag-smt4:start|JTAG-SMT4]]  \\  [[programmers:jtag-smt4:start|{{reference/programmers/jtag-smt4/jtag-smt4-obl-500.png?100}}]]         ^                     
| Max Speed |  30 <nowiki>MHz</nowiki>  |  30 <nowiki>MHz</nowiki>  |  30 <nowiki>MHz</nowiki>  |  30 <nowiki>MHz</nowiki>  |  30 <nowiki>MHz</nowiki>  |  30 <nowiki>MHz</nowiki>  | 
| Voltage Range |  1.8 V to 5 V  |  1.8 V to 5 V  |  1.8 V to 5 V  |  1.8 V to 5 V  |  1.8 V to 5 V  |  1.8 V to 3.3 V  | 
| Xilinx Native Support |  ISE 13.2+  \\  Vivado 2012.1+  |  ISE 14.1+  \\  Vivado 2013.3+  |  ISE 14.1+ \\ Vivado 2013.1+  |  ISE 14.1+  \\ Vivado 2013.1+  |  ISE 14.1+ \\ Vivado 2014.1  |  Vivado \\ Vitis 2020.1+  | 
| Xilinx Plug-in Support |  ISE 12.1+  |  ISE 12.1+  |  ISE 13.1+  |  ISE 13.1+  |  ISE 13.1+  |  NONE  | 
| Digilent Adept Support |  YES  |  YES  |  YES  |  YES  |  YES  |  YES  | 
| PC Interface |  USB  |  USB  |  USB  |  USB  |  USB  |  USB  | 
| Onboard USB Connector |  YES  |  YES  |  YES  |  YES [(USB D+ and D- signals routed to pads, allowing USB connector to be placed anywhere on the host PCB.)]  |  YES [(#1)]  |  YES [(#1)]  | 
| Host Board Connector Interface |  6-pin  \\  14-pin [(Using Xilinx’s 2×7, 2mm connector and the included adapter.)]  |  14-pin  |  11-Pad SMT  |  13-Pad SMT  |  18-Pad SMT  |  28-Pad SMT  | 
| 4-Wire JTAG |  YES  |  YES  |  YES  |  YES  |  YES  |  YES  | 
| 2-Wire JTAG |  YES  |  NO  |  YES  |  YES  |  NO  |  NO  | 
| Zynq-7000 \\ PS_SRST_B Support |  NO  |  YES  |  YES  |  YES  |  YES  |  YES  | 
| Zynq-7000 \\ PS_POR_B Support |  NO  |  NO  |  NO  |  NO  |  NO  |  YES  | 
| SPI Support |  YES  |  NO  |  YES  |  YES  |  NO  |  NO  | 
| Independent UART Channels |  0  |  0  |  0  |  0  |  1  |  3  | 

~~REFNOTES~~

----

--> All Pages - Internal Use #
<nspages -simplelist -title -subns -nopages -textNS="" -textPages=""> 

<--