~~NOTOC~~

====== JTAG-SMT4 Resource Center======


{{Digilent Infobox
| Store Page = https://digilent.com/shop/jtag-smt4-surface-mount-programming-module/
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/4-fpga/
| Title = JTAG-SMT4
| Subtitle = Surface-mount Programming Module
| Header = Features
| Bullet = Small, complete, all-in-one JTAG programming/debugging solution for Xilinx FPGAs with three UART side channels
| Bullet = Compatible with Xilinx Tools (version 2020.1 or newer required)
| Bullet = High-Speed USB 2.0 port that can drive JTAG bus up to 30Mbit/sec (frequency settable by user)
| Bullet = Open drain buffers allow PS_SRST_B and PS_POR_B pins to perform software-based resets of Xilinx’s Zynq® platform
| Bullet = Quad channel USB controller provides simultaneous access to JTAG and UART interfaces
| Bullet = Onboard buffers allow JTAG signals to operate at voltages from 1.8V to 3.3V
| Bullet = Small form-factor surface-mount module can be directly loaded on target boards
| Bullet = USB D+ and D- signals routed to pads, allowing USB connector to be placed anywhere on the host PCB
| Bullet = VBUS_DETECT pin allows for reduced current consumption when the module isn’t connected to a PC
| Header = Software
| Adept = [[software/adept/start]]
| Header = Product Compliance
| HTC = 8473301180
| ECCN = EAR99

}}

{{page>programmers:jtag-smt4:reference-manual}}

===== Documentation =====
{{topic>jtag-smt4 +doc}}
  * {{ :reference:programmers:jtag-smt4:smt4_a1.pdf |JTAG-SMT4 Mechanical Diagram}}

----
/*
===== Tutorials =====
{{topic>jtag-smt4 +tutorial}}

----
*/

{{tag>programmers start jtag-smt4 resource-center}}