~~NOTOC~~
 
====== JTAG-SMT3-NC Resource Center======

{{Digilent Infobox
| Store Page = https://digilent.com/shop/jtag-smt3-nc-surface-mount-programming-module/
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/4-fpga/
| Title = JTAG-SMT3-NC
| Subtitle = Surface-mount Programming Module
| Header = Features
| Bullet = Small, complete, all-in-one JTAG programming/debugging solution for Xilinx FPGAs with UART side channel
| Bullet = Compatible with Xilinx Tools
| Bullet = High-Speed USB 2.0 port that can drive JTAG bus up to 30Mbit/sec (frequency settable by user)
| Bullet = Open drain buffer on PS_SRST_B pin allows debugging software to reset the processor core of Xilinx’s Zynq® platform
| Bullet = Dual channel USB controller provides simultaneous access to both JTAG and UART interfaces
| Bullet = Separate Vref for JTAG and UART signals allows each interface to operate at difference voltages (1.8V to 5.5V)
| Bullet = Small form-factor surface-mount module can be directly loaded on target boards
| Bullet = USB D+ and D- signals routed to pads, allowing USB connector to be placed anywhere on the host PCB
| Bullet = VBUS_DETECT pin allows for reduced current consumption when the module isn’t connected to a PC
| Header = Product Compliance
| HTC = 8473301180
| ECCN = EAR99

}}

{{page>reference-manual}}

===== Documentation =====
{{topic>jtag-smt3 +doc}}
  * {{:reference:programmers:jtag-smt3:jtag-smt3_dimensions.zip| Mechanical Drawings}}
  * {{https://files.digilent.com/resources/programmers/jtag-smt3-nc/JTAG-SMT3-NC_SoV.pdf|Statement of Volatility}}

----

===== Tutorials =====
{{topic>jtag-smt3 +tutorial}}

----


{{tag>programmers start jtag-smt3 resource-center}}