~~NOTOC~~ 
     
====== PYNQ-Z1 ======
{{Digilent Infobox
| Store Page = https://digilent.com/shop/pynq-z1-python-productivity-for-zynq-7000-arm-fpga-soc/
| Manual = [[reference-manual]]
| Support = http://pynq.io
| Title = PYNQ-Z1 
| Subtitle = Python Productivity for Zynq
| Header = Features
| Bullet = Fully supported by the PYNQ framework 
| Bullet = 650MHz dual-core Cortex-A9 processor
| Bullet = 512 MB DDR3
| Bullet = Wide range of USB, Ethernet, Video and Audio connectivity
| Bullet = Arduino shield and Pmod connectors for adding-on hardware devices
| Bullet = Programmable from JTAG, Quad-SPI flash, and microSD card
| Header = Key FPGA Specifications
| Logic slices = 13,300 
| 6-input LUTs =  53,200
| Flip-Flops = 106,400
| Block RAM = 630 KB
| DSP Slices = 220
| Clock Resources = Zynq PLL with 4 outputs \\ 4 PLLs \\ 4 MMCMs \\ 125 MHz external clock
| Internal ADC = Dual-channel, 1 MSPS
| Header = Connectivity and On-board I/O
| USB = USB-UART \\ USB-JTAG Programmer \\ USB Host
| Ethernet = Gigabit Ethernet PHY
| HDMI = Sink (input) \\ Source (output)
| Microphone = Microphone with PDM interface
| Audio = PWM driven mono audio output \\ with 3.5mm jack
| Pmod Connectors = 2
| Other Connectors = Arduino/chipKIT shield connector
| Switches = 2 slide switches
| Buttons = 4 Push buttons 
| LEDs = 4 LEDs, 2 RGB LEDs
| Header = Electrical
| Power Inputs = USB \\ 7V-15V External source
| Header = Physical
| Width = 88 mm
| Length = 124 mm
| Header = Product Compliance
| HTC = 8471500150
| ECCN = 5A992.c
}}

{{page>reference-manual}} \\ \\
 
===== Documentation =====
  * [[./reference-manual|Pynq Z1 Reference Manual]]
  * [[learn/programmable-logic/doc/xilinx/zynq-datasheet]]
  * [[learn/programmable-logic/doc/xilinx/zynq-technical-reference-manual]]

  * PYNQ Manual: [[http://pynq.readthedocs.io|pynq.readthedocs.io]]
  * PYNQ Github: [[https://github.com/Xilinx/PYNQ|PYNQ Github]]

  * {{:reference:programmable-logic:pynq-z1:pynq-z1_sch.pdf|Pynq Z1 Rev. C Schematic}}
  * {{https://files.digilent.com/resources/programmable-logic/pynq-z1/pynq-z1-sch-f0.pdf|Pynq Z1 Rev. F Schematic}}

  * {{https://files.digilent.com/resources/programmable-logic/documents/RTL8211F_PCN.pdf|Product Change Notice - Ethernet PHY}}
  * {{https://files.digilent.com/resources/programmable-logic/documents/W25Q128JV_PCN.pdf|Product Change Notice - Flash Memory}}

**Note:** //Xilinx software tools are not available for download in some countries. Prior to purchasing the PYNQ-Z1, please check the supporting software's availability, as it is required for the board's use.//

----
===== Design Resources =====
  * Boot images for the Pynq Z1 can be found on the project site's [[http://www.pynq.io/board.html|Development Boards]] page.
  * Master XDC: {{:reference:programmable-logic:pynq-z1:pynq-z1_c.zip|Download}}
  * Zynq Presets: {{ :reference:programmable-logic:pynq-z1:pynq_revc.zip |Download}}
  * Protective Acrylic Case: {{ :reference:programmable-logic:pynq-z1:pynq_case.zip |Download}}
  * 3D model: {{ :reference:programmable-logic:pynq-z1:pynq-z1_3d.zip |Download}}
  * 3D Case: {{ :reference:programmable-logic:pynq-z1:pynq_case_modified.zip |Download }}

----
===== Tutorials =====
{{topic>pynq-z1 +tutorial}}
All support and project tutorials for PYNQ are found at the project webpage at [[http://www.pynq.io/ |www.pynq.io]].
----
===== Example Projects =====
{{topic>pynq-z1 +project}}
All support and project tutorials for PYNQ are found at the project webpage at [[http://www.pynq.io/ |www.pynq.io]].
----
===== Additional Resources ===== 
  * [[https://www.xilinx.com/support/university/workshops.html|Xilinx Vivado Workshop materials]]
  * {{https://files.digilent.com/resources/programmable-logic/pynq-z1/pynq-z1-statement-of-volatility.pdf|Pynq Z1 Statement of Volatility}}

----

{{tag>programmable-logic programmable-logic-start pynq-z1 resource-center}}