~~NOTOC~~ 
      
====== Genesys 2 ======
{{Digilent Infobox
| Store Page = https://digilent.com/shop/genesys-2-kintex-7-fpga-development-board/
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/4-fpga/
| Title = Genesys 2
| Subtitle = Kintex-7 FPGA Development Board
| Header = Features
| Bullet = Programmable over JTAG and Quad-SPI Flash
| Bullet = On-chip analog-to-digital converter (XADC)
| Header = Key Specifications
| FPGA Part # = XC7K325T-2FFG900C
| Logic Cells =  50,950 logic slices \\ (4 6-input LUTs & 8 flip-flops each)
| Block RAM = 16 Mbits
| DSP slices = 840
| CMTs = 10, each with PLL
| DDR3 = 1800 MT/s with 32-bit data width
| Internal clock = 450 MHz+
| Quad-SPI Flash = 16 MB
| Ethernet = 10/100/1000 PHY
| Header = Connectivity and On-board I/O
| Pmod Connectors = 5 Pmod ports
| VGA = 1 VGA connector
| HDMI = HDMI Sink and HDMI Source
| SD = microSD card connector
| USB = HID host for mouse, keyboard, \\ and USB MSD host for storage
| Audio = Audio codec with four 3.5mm jacks
| FMC Connector = Fully-populated 400-pin FMC \\ HPC connector w/ ten GTX lanes
| Switches = 8
| Buttons = 6
| Header = Electrical
| Power = 12V ±5 % external power only
| Header = Physical
| Width = 5.8 in
| Length = 6.8 in
}}

{{page>reference-manual}} \\ \\

===== Documentation =====
{{topic>genesys-2 +doc -legacy}}

  * {{/reference/programmable-logic/genesys-2/genesys-2_sch.pdf|Genesys 2 Schematic}}

**Note:** //Xilinx software tools are not available for download in some countries. Prior to purchasing the Genesys 2, please check the supporting software's availability, as it is required for the board's use.//

----
===== Tutorials =====
{{topic>genesys-2 +tutorial -legacy -in-work}}

----
===== Example Projects =====
**Note:** //These example projects are supported in Vivado and Xilinx SDK 2016.4. No further updates are planned.//

{{topic>genesys-2 +project -legacy}}

----

===== Additional Resources =====
  * [[programmable-logic:genesys-2:demos:usb-device|USB Device Demo]]
  * [[programmable-logic:genesys-2:demos:oob|Out-Of-Box Demo]]
  * {{:reference:programmable-logic:genesys-2:genesys_2_revf.rar |3D CAD Model}}
  * {{:reference:programmable-logic:genesys-2:genesys2_dimensions.zip |Mechanical Drawing}}
  * {{:reference:programmable-logic:genesys-2:Genesys_2_CE.pdf |Declaration of Conformity}}

----

{{tag>programmable-logic programmable-logic-start genesys-2 resource-center}}