~~NOTOC~~ 
   
====== Pmod WiFi ======
  
{{Digilent Infobox
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/7-add-on-boards/
| Title = Pmod WiFi
| Subtitle = WiFi Interface 802.11g
| Header = Features
| Bullet = IEEE 802.11-compliant RF transceiver
| Bullet = Send data at 1 and 2 Mbps up to 400 m
| Bullet = Serialized unique MAC address
| Bullet = Integrated PCB antenna
| Bullet = Radio regulation certification for the US, Canada, Europe, and Japan
| Bullet = Wi-Fi certified
| Bullet = 12-pin Pmod connector with SPI interface
| Bullet = Follows the Digilent {{/reference/pmod/digilent-pmod-interface-specification.pdf |Pmod Interface Specification}} Type 2A
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/spi/start | SPI]]
| Specification Version = 1.2.0
| Logic Level = 3.3V
| Header = Physical
| Width = 1.7 in (4.31 cm)
| Length = 1.0 in (2.54 cm)
| Header = Design Resources
| Fritzing Part = {{reference:pmod:pmodwifi:pmodwifi.fzpz| }}
| Header = Documentation
| Primary IC = [[http://www.microchip.com/wwwproducts/Devices.aspx?product=MRF24WG0MA | MRF24WG0MA Wi-Fi]]
| Reference Manual = [[pmod/pmodwifi/reference-manual]]
| Schematic = {{reference:pmod:pmodwifi:pmodwifi_sch.pdf| }}
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-2x6.png?direct |}}
| Pin 1 = CS
| Pin 2 = SDI
| Pin 3 = SDO
| Pin 4 = SCK
| Pin 5 = GND
| Pin 6 = VCC
| Pin 7 = INT
| Pin 8 = RESET
| Pin 9 = WP
| Pin 10 = HIBERNATE
| Pin 11 = GND
| Pin 12 = VCC
}}

{{page>reference-manual}} \\ \\
 
===== Tutorials =====

  * [[learn/software/tutorials/digilent-core-install/start | Installing the Digilent Core for Arduino]]
  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]

----

===== Example Projects =====

==Microprocessor==
  * [[learn/software/tutorials/digilent-core-install/start | Installing the Digilent Core for Arduino]]
  * [[/agreement|Libraries and MPIDE Example]]
    * Note: Must agree to Microchip's Terms of Use in order to download MPIDE library
  * [[http://www.instructables.com/id/3D-Road-Mapping-Autovehicle/|3D road mapping autovehicle]] - Community Project
  * [[http://www.instructables.com/id/Keep-close-to-me-digilent-robot-project/|Keep close to me (digilent robot project)]] - Community project
==Programmable Logic==
  * [[http://www.instructables.com/id/AssistGlove-pre-evaluation/|AssistGlove pre-evaluation]] - Community Project
  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]
     * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.

<WRAP center round tip 80%>
This product is in the process of being retired and will be sold as is until it is out of stock. To this end, software support for this product is limited to the materials provided by Digilent. There are no plans to update any existing Vivado and SDK/Vitis projects or Arduino/Digilent Core projects beyond the version they are provided in. Changes to the Xilinx toolchain between SDK and Vitis mean that the software libraries do not work as-is in Vitis and may require significant refactoring in order to get them to compile.
</WRAP>


----

===== Additional Resources =====
  * Fundamentals of Internet Using Digilent's Network IP Stack {{ :reference:pmod:pmodwifi:networkslides.pdf |PDF}}
  * [[http://www.microchip.com/design-centers/wireless-connectivity|MRF24WG0MA Wifi Radio Certifications]]
  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}

----

{{tag>legacy pmod pmod-start pmod-spi pmodwifi wi-fi resource-center}}