~~NOTOC~~ 
   
====== Pmod USBUART ======

  
{{Digilent Infobox
| Store Page = https://digilent.com/shop/pmod-usbuart-usb-to-uart-interface/
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/7-add-on-boards/
| Title = Pmod USBUART
| Subtitle = USB to UART Interface
| Header = Features
| Bullet = USB to serial UART interface
| Bullet = Micro USB connector
| Bullet = Option to power the system board through the FTDI chip
| Bullet = 6-pin Pmod connector with UART interface
| Bullet = Follows the Digilent {{/reference/pmod/digilent-pmod-interface-specification.pdf |Pmod Interface Specification}} Type 4
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/uart/start | UART]]
| Specification Version = 1.2.0
| Logic Level = 3.3V
| Header = Physical
| Width = 1.0 in (2.54 cm)
| Length = 0.80 in (2.03 cm)
| Header = Design Resources
| Fritzing Part = {{reference:pmod:pmodusbuart:pmodusb-uart.fzpz| }}
| 3D CAD file = {{reference:pmod:pmodusbuart:pmod_usbuart.zip|STP file}}
| Header = Documentation
| Primary IC = [[http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT232R.pdf | FTDI FT232RQ]]
| Reference Manual = [[pmod/pmodusbuart/reference-manual]]
| Schematic = {{reference:pmod:pmodusbuart:pmodusbuart_sch.pdf| }}
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-1x6.png?direct |}}
| Pin 1 = RTS
| Pin 2 = RXD
| Pin 3 = TXD
| Pin 4 = CTS
| Pin 5 = GND
| Pin 6 = VCC
}} 

{{page>reference-manual}} \\ \\
 



===== Example Projects =====
  * [[reference/test-and-measurement/digital-discovery/controlling-digital-discovery-with-labview/start| Controlling Digital Discovery With LabVIEW]]

==Microprocessor==
  * [[http://www.instructables.com/id/Reflow-Toaster-Oven/ |Reflow Toaster Oven]] - Community Project
  * [[learn/software/tutorials/digilent-core-install/start | Installing the Digilent Core for Arduino]]


==Programmable Logic==
  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]
     * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.

----

===== Additional Resources =====
  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}

----

{{tag>pmod pmod-start pmod-uart pmodusbuart usb-to-uart resource-center}}