~~NOTOC~~ 
   
====== Pmod TPH2 ======
  
{{Digilent Infobox
| Store Page = https://digilent.com/shop/pmod-tph2-12-pin-test-point-header/
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/7-add-on-boards/
| Title = Pmod TPH2 
| Subtitle = 12-pin Test Point Header
| Header = Features
| Bullet = 12 external test point headers
| Bullet = Easily access and test signals passing through
| Bullet = 12-pin Pmod connector with GPIO interface
| Bullet = Follows the Digilent {{/reference/pmod/digilent-pmod-interface-specification.pdf |Pmod Interface Specification}} Type 1
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/gpio/start | GPIO]]
| Specification Version = 1.2.0
| Logic Level = 3.3V
| Header = Physical
| Width = 1.3 in (3.30 cm)
| Length = 0.80 in (2.03 cm)
| Header = Design Resources
| Fritzing Part = {{reference:pmod:pmodtph2:pmodtph2.fzpz| }}
| 3D CAD Model = {{reference:pmod:pmodtph2:pmodtph2.zip| 3D Model}}
| Header = Documentation
| Reference Manual = [[pmod/pmodtph2/reference-manual]]
| Schematic = {{reference:pmod:pmodtph2:pmodtph2_sch.pdf| }}
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-2x6.png?direct |}}
| Pin 1 = P1
| Pin 2 = P2
| Pin 3 = P3
| Pin 4 = P4
| Pin 5 = GND
| Pin 6 = VCC
| Pin 7 = P7
| Pin 8 = P8
| Pin 9 = P9
| Pin 10 = P10
| Pin 11 = GND
| Pin 12 = VCC
}}


{{page>reference-manual}} \\ \\
 

===== Example Projects =====

==Microprocessor==
  * [[http://www.instructables.com/id/Mpemba-Effect/ |Mpemba Effect]] - Community Project

==Programmable Logic==
  * No programmable logic example projects are available for the Pmod TPH2

----

===== Additional Resources =====
  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}

----

{{tag>pmod pmod-start pmod-gpio pmodtph2 test-point-headers resource-center}}