~~NOTOC~~ 
   
====== Pmod TPH  ======
  
{{Digilent Infobox
| Store Page = https://digilent.com/shop/pmod-tph-6-pin-test-point-header/
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/7-add-on-boards/
| Title = Pmod TPH
| Subtitle = 6-pin Test Point Header
| Header = Features
| Bullet = 6 external test point headers
| Bullet = Easily access and test signals passing through
| Bullet = 6-pin Pmod port with GPIO interface
| Bullet = Follows the Digilent {{/reference/pmod/digilent-pmod-interface-specification.pdf |Pmod Interface Specification}} Type 1
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/gpio/start | GPIO]]
| Specification Version = 1.2.0
| Logic Level = 3.3V
| Header = Physical
| Width = 1.0 in (2.54 cm)
| Length = 0.80 in (2.03 cm)
| Header = Design Resources
| Fritzing Part = {{reference:pmod:pmodtph:pmodtph.fzpz| }}
| Header = Documentation
| Reference Manual = [[pmod/pmodtph/reference-manual]]
| Schematic = {{reference:pmod:pmodtph:pmodtph_sch.pdf| }}
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-1x6.png?direct |}}
| Pin 1 = P1
| Pin 2 = P2
| Pin 3 = P3
| Pin 4 = P4
| Pin 5 = GND
| Pin 6 = VCC
}}

{{page>reference-manual}} \\ \\
 


===== Example Projects =====

== Programmable Logic==
  * No programmable logic example projects are available for the Pmod TPH

----

===== Additional Resources =====
  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}

----

{{tag>pmod pmod-start pmod-gpio pmodtph test-point-headers resource-center}}