~~NOTOC~~ ====== Pmod SSR ====== {{Digilent Infobox | Store Page = https://digilent.com/shop/pmod-ssr-solid-state-relay-electronic-switch/ | Manual = [[reference-manual]] | Support = https://forum.digilent.com/forum/7-add-on-boards/ | Title = Pmod SSR | Subtitle = Solid State Relay | Header = Features | Bullet = 0-48 V blocking voltage | Bullet = Can switch up to 6 Arms continuous current | Bullet = 2500 V input/output isolation | Bullet = Low on resistance with fast turn on/off | Bullet = Onboard LED to indicate on/off state | Bullet = Onboard terminal block for easy wire connection | Bullet = Follows the Digilent Pmod Interface Specification Type 1 | Header = Electrical | Bus = [[learn/fundamentals/communication-protocols/gpio/start | GPIO]] | Specification Version = 1.2.0 | Logic Level = 3.3V | Header = Physical | Width = 1.7 in (4.32 cm) | Length = 0.80 in (2.03 cm) | Overall Height = 0.75 in (1.905 cm) | Header = Design Resources | 3D CAD file = {{reference:pmod:pmodssr:pmod_ssr.zip|STP file}} | Header = Documentation | Reference Manual = [[pmod/pmodssr/reference-manual]] | Schematic = {{reference:pmod:pmodssr:pmodssr_sch.pdf| }} | Header = J1 Pinout | Full Row = {{ :reference:pmod:pmod-pinout-1x6.png?direct |}} | Pin 1 = ON | Pin 2 = NC | Pin 3 = NC | Pin 4 = NC | Pin 5 = GND | Pin 6 = VCC }} {{page>reference-manual}} \\ \\ ===== Example Projects ===== ==Microprocessor== * [[learn/software/tutorials/digilent-core-install/start | Installing the Digilent Core for Arduino]] * {{:reference:pmod:pmodssr:pmod_ssr_demo.zip|Example Code for Arduino IDE}} * [[https://www.hackster.io/mmigs/using-the-pmod-ssr-with-arduino-uno-f1ff96|Using the Pmod SSR with Arduino Uno]] - Application note ==Programmable Logic== * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]] * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier. * {{ :reference:pmod:pmodssr:ssr_hdl.zip |Basys 3 Verilog Example - Vivado 2016.4}} ---- ===== Additional Resources ===== * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}} ---- {{tag>pmod pmod-start pmod-gpio pmodssr resource-center}}