~~NOTOC~~ 
   
====== Pmod SF ======

{{Digilent Infobox
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/7-add-on-boards/
| Title = Pmod SF
| Subtitle = External ROM 2MB Serial Flash Memory
| Header = Features
| Bullet = 16Mbit serial Flash memory
| Bullet = Data retention greater than 20 years
| Bullet = 6-pin Pmod connector with SPI interface
| Bullet = Follows the Digilent {{/reference/pmod/digilent-pmod-interface-specification.pdf |Pmod Interface Specification}} Type 2
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/spi/start | SPI]]
| Specification Version = 1.2.0
| Logic Level = 3.3V
| Header = Physical
| Width = 1.0 in (2.54 cm)
| Length = 0.80 in (2.03 cm)
| Header = Design Resources
| Fritzing Part = {{reference:pmod:pmodsf:pmodsf.fzpz| }}
| Header = Documentation
| Primary IC = [[https://www.micron.com/~/media/documents/products/data-sheet/nor-flash/serial-nor/m25p/m25p16.pdf | M25P16]]
| Reference Manual = [[pmod/pmodsf/reference-manual]]
| Schematic = {{reference:pmod:pmodsf:pmodsf_sch.pdf| }}
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-1x6.png?direct |}}
| Pin 1 = ~CS
| Pin 2 = MOSI
| Pin 3 = MISO
| Pin 4 = SCK
| Pin 5 = GND
| Pin 6 = VCC
}}

{{page>reference-manual}} \\ \\
 


===== Example Projects =====

==Microprocessor==
  * {{:reference:pmod:pmodsf:sfspi.zip|Library and MPIDE Example}}
  * {{:reference:pmod:pmodsf:pmodsf_mplab_library.zip|Library and MPLAB Example}}
==Programmable Logic==
  * {{:reference:pmod:pmodsf:pmodsf_ise_demo.zip|Nexys 3 VHDL Example - ISE 13.4}}

----

===== Additional Resources =====
  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}

----

{{tag>legacy pmod pmod-start pmod-spi pmodsf serial-flash resource-center}}