~~NOTOC~~ 
   
====== Pmod JSTK ======

  
{{Digilent Infobox
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/7-add-on-boards/
| Title = Pmod JSTK
| Subtitle = 2-axis Joystick
| Header = Features
| Bullet = 2-axis resistive joystick with central push button
| Bullet = Two additional user push buttons
| Bullet = Two user indicator LEDs
| Bullet = 6-pin Pmod connector with SPI interface
| Bullet = Follows the Digilent {{/reference/pmod/digilent-pmod-interface-specification.pdf |Pmod Interface Specification}} Type 2
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/spi/start | SPI]]
| Specification Version = 1.2.0
| Logic Level = 3.3V
| Header = Physical
| Width = 1.8 in (4.57 cm)
| Length = 1.3 in (3.30 cm)
| Header = Design Resources
| Fritzing Part = {{reference:pmod:pmodjstk:pmodjstk.fzpz |}}
| Header = Documentation
| Primary IC = [[http://www.atmel.com/Images/doc8006.pdf | Atmel ATtiny24]]
| Reference Manual = [[pmod/pmodjstk/reference-manual]]
| Schematic = {{reference:pmod:pmodjstk:pmodjstk_sch.pdf| }}
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-1x6.png?direct |}}
| Pin 1 = ~CS
| Pin 2 = MOSI
| Pin 3 = MISO
| Pin 4 = SCLK
| Pin 5 = GND
| Pin 6 = VCC
}}

{{page>reference-manual}} \\ \\
 


===== Example Projects =====
{{topic>pmodjstk +project}}
==Microprocessor==
  * [[learn/software/tutorials/digilent-core-install/start | Installing the Digilent Core for Arduino]]
  * {{:reference:pmod:pmodjstk:pmodjstk-mpide-lib.zip|Library and MPIDE Example}}
  * [[http://www.instructables.com/id/Building-Jousting-Robots/|Building Jousting Robots]] - Community Project
  * [[http://www.instructables.com/id/How-to-use-the-PmodJSTK-with-the-WF32/|How to use the PmodJSTK with the WF32]] - Community Project
  * [[http://www.instructables.com/id/Plug-and-Play-Pmods-Using-LabVIEW/step4/LabVIEW-Code/|Plug and Play Pmods Using LabVIEW]] - Community Project
  * [[https://www.hackster.io/mmigs/using-the-pmod-jstk-with-arduino-uno-6b6bc9|Using the Pmod JSTK with Arduino Uno]] - Application note
==Programmable Logic==
  * {{:reference:pmod:pmodjstk:pmodjstk_demo_verilog.zip|Nexys 3 Verilog Example - ISE 14.2}}
  * {{:reference:pmod:pmodjstk:pmodjstk_demo.zip|Nexys 3 VHDL Example - ISE 14.2}}
  * [[http://www.instructables.com/id/How-to-Use-the-PmodJSTK-With-the-Basys3-FPGA/|How to use a Joystick with an FPGA]] - Community Project
  * [[http://www.instructables.com/id/The-Claw-Game-the-Acrylic-Structure/?ALLSTEPS|How to Build Your Own Claw Game Structure]] - Community Project
  * [[http://www.instructables.com/id/Using-the-PmodJSTK-to-Control-Stepper-Motors-on-th/|Using a Joystick to control Stepper Motors with an FPGA]] - Community Project
  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]
    * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.


----

===== Additional Resources =====
  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}

----

{{tag>legacy pmod pmod-start pmod-spi pmodjstk 2-axis joystick resource-center}}