~~NOTOC~~ 
   
====== Pmod I2S ======

  
{{Digilent Infobox
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/7-add-on-boards/
| Title = Pmod I2S
| Subtitle = Stereo Audio Output
| Header = Features
| Bullet = Stereo 24-bit D/A converter
| Bullet = Output converted audio signals through standard headphone jack
| Bullet = Supports all major audio data interface formats
| Bullet = Accepts 16-24 bits of audio data
| Bullet = 6-pin Pmod port with GPIO interface
| Bullet = Follows the Digilent {{/reference/pmod/digilent-pmod-interface-specification.pdf |Pmod Interface Specification}}
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/gpio/start | GPIO]]
| Specification Version = 1.2.0
| Logic Level = 3.3V
| Header = Physical
| Width = 1.0 in (2.54 cm)
| Length = 0.80 in (2.03 cm)
| Header = Design Resources
| Fritzing Part = {{:reference:pmod:pmodi2s:pmodi2s.fzpz| }}
| Header = Documentation
| Primary IC = [[https://d3uzseaevmutz1.cloudfront.net/pubs/proDatasheet/CS4344-45-48_F2.pdf | CS4344]]
| Reference Manual = [[pmod/pmodi2s/reference-manual]]
| Schematic = {{:reference:pmod:pmodi2s:pmodi2s_sch.pdf| }}
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-1x6.png?direct |}}
| Pin 1 = MCLK
| Pin 2 = LCRK
| Pin 3 = SCK
| Pin 4 = SDIN
| Pin 5 = GND
| Pin 6 = VCC
}}

{{page>reference-manual}} \\ \\
 

===== Example Projects =====
  * No programmable logic example projects are available for the Pmod AMP3

----

===== Additional Resources ===== 
  * {{reference:pmod:pmodi2s:pmod_i2s.zip|PmodI2S .stp file}}
  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}

----

 {{tag>legacy pmod pmod-start pmod-gpio pmodi2s stereo-audio-output resource-center}}