~~NOTOC~~ 
     
====== Pmod ESP32  ======
 
{{Digilent Infobox
| Store Page = https://digilent.com/shop/pmod-esp32-wireless-communication-module/
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/7-add-on-boards/
| Title = Pmod ESP32
| Subtitle = WiFi/BLE/Bt 4.1 Interface
| Header = Features
| Bullet = Wi-Fi, Bluetooth LE, and Bluetooth communication available
| Bullet = 20.5 dBm output power at the antenna
| Bullet = User button for resetting the processor after a mode switch
| Bullet = User switch for toggling between UART and SPI communication
| Bullet = Low power sleep mode for battery powered applications
| Bullet = 12-pin Pmod connector with SPI and UART interfaces
| Bullet = Follows Digilent Pmod Interface Specification Types 2A and 3A
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/uart/start | UART]], [[learn/fundamentals/communication-protocols/spi/start | SPI]]
| Specification Version = 1.2.0
| Logic Level = 3.3V
| Header = Physical
| Width = 0.80 in (2.03 cm)
| Length = 2.0 in (5.08 cm)

| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-2x6.png?direct |}}
| Pin 1 = RTS / SS
| Pin 2 = RXD / MOSI 
| Pin 3 = TXD / MISO
| Pin 4 = CTS / SCK
| Pin 5 = GND
| Pin 6 = VCC
| Pin 7 = INT
| Pin 8 = EN
| Pin 9 = SELECT
| Pin 10 = GPIO
| Pin 11 = GND
| Pin 12 = VCC
}}

{{page>reference-manual}} \\ \\

===== Documentation =====
  * [[/pmod/pmodesp32/reference-manual]]

  * {{/pmod/pmodesp32/pmodesp32_sch.pdf|Pmod ESP32 Schematic (Rev A.1)}}
  * {{/reference/pmod/pmodesp32/schematic/pmodesp32_sch.pdf|Pmod ESP32 Schematic (Rev A.0)}}

  * {{https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf|ESP32 Datasheet from Espressif}}
  * {{https://www.espressif.com/sites/default/files/documentation/esp32_at_instruction_set_and_examples_en.pdf|AT Command Set and Examples from Espressif}}

  * {{ :pmod:pmodesp32:espressif_esp_wroom_32_pcn.pdf |Product Change Notice - ESP32 Part}}

----

===== Example Projects =====
  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]
    * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.

----
===== Additional Resources =====
  * {{reference/pmod/pmod-interface-specification-1_2_0.pdf |Pmod Specification Version 1.2.0}}
  * [[https://www.renesas.com/en-us/products/synergy/gallery/partner-projects/esp-32-wifi-pmod.html |Pmod ESP32 Renesas Synergy Application]]
  * [[https://github.com/espressif/esp32-at|ESP 32 AT Firmware Source]]
  * [[http://esp-idf.readthedocs.io/en/latest/get-started/index.html|Getting started guide for programming the ESP32 with custom applications]]
  * [[https://s3-us-west-2.amazonaws.com/digilent-file-share-public/forums/PmodESP32_CE.pdf|Pmod ESP32 Declaration of Conformity]]
  * [[https://www.renesas.com/us/en/products/synergy/gallery/partner-projects/esp-32-wifi-pmod.html|PMOD ESP32 for Synergy Solution]]

  

----

{{tag>pmod pmod-start pmod-uart pmod-spi pmodesp32 bluetooth wifi resource-center}}