~~NOTOC~~ 
   
====== Pmod DA2  ======
  
{{Digilent Infobox
| Store Page = https://digilent.com/shop/pmod-da2-two-12-bit-d-a-outputs/
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/7-add-on-boards/
| Title = Pmod DA2
| Subtitle = Two 12-bit D/A Outputs
| Header = Features
| Bullet = 12-bit digital-to-analog converter
| Bullet = Two simultaneous conversion channels
| Bullet = Very low power consumption
| Bullet = 6-pin Pmod connector with GPIO interface
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/gpio/start | GPIO]]
| Specification Version = 1.2.0
| Logic Level = 3.3V
| Header = Physical
| Width = 1.0 in (2.54 cm)
| Length = 0.80 in (2.03 cm)
| Header = Design Resources
| Fritzing Part = {{reference:pmod:pmodda2:pmodda2.fzpz| }}
| Header = Documentation
| Primary IC = [[http://www.ti.com/lit/ds/symlink/dac121s101.pdf | DAC121S101-Q1]]
| Reference Manual = [[pmod/pmodda2/reference-manual]]
| Schematic = {{reference:pmod:pmodda2:pmodda2_sch.pdf| }}
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-1x6.png?direct |}}
| Pin 1 = ~SYNC
| Pin 2 = DINA
| Pin 3 = DINB
| Pin 4 = SCLK
| Pin 5 = GND
| Pin 6 = VCC
}}

{{page>reference-manual}} \\ \\
 


===== Example Projects =====

==Microprocessor==
  * {{:reference:pmod:pmodda2:pmodda2-mpide-lib.zip|Library and MPIDE Example}}
  * [[https://www.hackster.io/mmigs/using-the-pmod-da2-with-arduino-uno-e47768|Using the Pmod DA2 with Arduino Uno]] - Application note
==Programmable Logic==
  * {{:reference:pmod:pmodda2:pmodda2_demo.zip|X-Board VHDL Example}}
  * {{:reference:pmod:pmodda2:pmod_da2_demo.zip|Verilog Example}}

==Reference Project==
  * {{:reference:pmod:pmodda2:pmodda2_refcomp.zip|Reference Component}}

----

===== Additional Resources =====
  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}


----

{{tag>pmod pmod-start pmod-gpio pmodda2 dac resource-center}}