~~NOTOC~~ 
   
====== Pmod COLOR ======
  
{{Digilent Infobox
| Store Page = https://digilent.com/shop/pmod-color-color-sensor-module/
| Manual = [[reference:pmod:pmodcolor:reference-manual]]
| Support = https://forum.digilent.com/forum/7-add-on-boards/
| Title = Pmod COLOR
| Subtitle = Color Detector
| Header = Features
| Bullet = Red, green, blue, and clear light sensing
| Bullet = IR-blocking filter
| Bullet = White LED for reflective measurements
| Bullet = Suitable for use behind darkened glass
| Bullet = Optional pull-up resistors for SCL and SDA pins
| Bullet = Small PCB size for flexible designs 0.8" × 1.35" (2.0 cm × 3.4 cm)
| Bullet = 6-pin Pmod connector with I²C serial interface
| Bullet = Pass-through Pmod host port for daisy chaining
| Bullet = Follows Digilent {{/reference/pmod/pmod-interface-specification-1_2_0.pdf |Pmod Interface Specification 1.2.0}}
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/i2c/start | I²C]] 
| Specification Version = 1.2.0
| Logic Level = 3.3V
| Header = Physical
| Width = 0.8 in (2.032 cm)
| Length = 1.35 in (3.429 cm)
| Header = Documentation
| Primary IC = [[http://ams.com/eng/Products/Light-Sensors/Color-Sensors/TCS34725 | AMS's TCS34725]]
| Reference Manual = [[reference-manual|Wiki]]
| Schematic = {{ :reference:pmod:pmodcolor:pmodcolor_sch.pdf |Pmod COLOR Schematic}}
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-1x6.png?direct | }}
| Pin 1 = IO1/~INT
| Pin 2 = IO2/LED_EN
| Pin 3 = SCL
| Pin 4 = SDA
| Pin 5 = GND
| Pin 6 = VCC
| Header = Product Compliance
| HTC = 8473301180
| ECCN = EAR99
}}

{{page>reference-manual}} \\ \\
 

===== Example Projects =====
==Microprocessor==
  * [[learn/software/tutorials/digilent-core-install/start|Installing the Digilent Core for Arduino]]
  * {{:reference:pmod:pmodcolor:pmodcolor.zip|Library and example code for a microcontroller using the Arduino IDE}}

==Programmable Logic==
  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]
    * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.

----

===== Community Projects =====

  * [[https://projects.digilentinc.com/arthur-brown/displaying-color-readings-with-the-pmod-color-and-python-ebd794|Visualizing Pmod COLOR RGB Data]]

----

===== Additional Resources =====
/*This section could have a user guide, if one was created.*/
  * Specification Version 1.2.0: {{/reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}

----


{{tag>pmod pmod-start pmod-i2c pmodcolor color-detector resource-center}}