~~NOTOC~~ 
   
====== Pmod BT2 ======

  
{{Digilent Infobox
| Store Page = https://digilent.com/shop/pmod-bt2-bluetooth-interface/
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/7-add-on-boards/
| Title = Pmod BT2
| Subtitle = Bluetooth Interface
| Header = Features
| Bullet = Bluetooth 2.1/2.0/1.2/1.0 compatible
| Bullet = Add wireless capability with this low power, Class 2 Bluetooth radio
| Bullet = Supports HID profile for making accessories such as pointing devices, etc.
| Bullet = Secure communications, 128-bit encryption
| Bullet = Six different modes
| Bullet = 12-pin Pmod port with UART interface
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/uart/start | UART]]
| Specification Version = 1.2.0
| Logic Level = 3.3V
| Header = Physical
| Width = 1.5 in (3.81 cm)
| Length = 0.80 in (2.03 cm)
| Header = Design Resources
| Fritzing Part = {{:reference:pmod:pmodbt2:pmodbt2.fzpz| }}
| Header = Documentation
| Primary IC = [[http://www.microchip.com/wwwproducts/en/RN42 | RN-42]]
| Reference Manual = [[pmod/pmodbt2/reference-manual]]
| Schematic = {{:reference:pmod:pmodbt2:pmodbt2_sch.pdf| }}
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-2x6.png?direct |}}
| Pin 1 = RTS
| Pin 2 = RXD
| Pin 3 = TXD
| Pin 4 = CTS
| Pin 5 = GND
| Pin 6 = VCC
| Pin 7 = STATUS
| Pin 8 = RST
| Pin 9 = NC
| Pin 10 = NC
| Pin 11 = GND
| Pin 12 = VCC
| Header = J2 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-1x6.png?direct |}}
| Pin 1 = MISO
| Pin 2 = MOSI
| Pin 3 = SCK
| Pin 4 = CS
| Pin 5 = GND
| Pin 6 = VCC
}}

{{page>reference-manual}} \\ \\


===== Example Projects =====
==Microprocessor==
  * [[learn/software/tutorials/digilent-core-install/start | Installing the Digilent Core for Arduino]]
  * {{:reference:pmod:pmodbt2:PmodBT2 Library + Demo.zip|Library and MPIDE Example}}
  * [[http://www.instructables.com/id/Team-Awesome-Job-The-Interactive-Notification-Case/?ALLSTEPS |Team Awesome Job: The Interactive Notification Case (I.N.C.)]] - Community Project
  * [[http://www.instructables.com/id/Persistence-of-Vision-LED-Display/?ALLSTEPS|Persistence of Vision LED Display]] - Community Project
  * [[http://www.instructables.com/id/WSU-Hardware-Hackathon-Encrypted-Key-unlocking-Dra/?ALLSTEPS|Encrypted Key unlocking Drawer]] - Community Project
  * [[http://www.instructables.com/id/Controlling-Servos-via-Bluetooth-RN-42-and-LabVIEW/|Controlling Servos via Bluetooth (RN-42) and LabVIEW]] - Community Project
{{topic>pmodbt-2 +project}}

==Programmable Logic==
  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]
    * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.



----

===== Additional Resources =====
  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}
  * [[http://ww1.microchip.com/downloads/en/DeviceDoc/bluetooth_cr_UG-v1.0r.pdf|RN42 User Manual]]

----


{{tag>pmod pmod-start pmod-uart pmodbt2 bluetooth resource-center}}