~~NOTOC~~ 
   
====== Pmod AD1 ======
   
{{Digilent Infobox
| Store Page = https://digilent.com/shop/pmod-ad1-two-12-bit-a-d-inputs/
| Manual = [[reference-manual]] 
| Support = https://forum.digilent.com/forum/7-add-on-boards/
| Title = Pmod AD1
| Subtitle = Two 12-bit A/D Inputs
| Header = Features
| Bullet = Simultaneous A/D conversion at up to one MS/s per channel
| Bullet = Two 2-pole Sallen-Key anti-alias filters
| Bullet = Follows the Digilent {{/reference/pmod/digilent-pmod-interface-specification.pdf |Pmod Interface Specification}}
| Header = Key Specifications
| Channels = 2
| Sample Rate = 1 MS/s per channel
| Resolution  = 12-bits
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/spi/start | SPI]]
| Specification Version = 1.2.0
| Logic Level = 3.3V or 5V
| Header = Physical
| Width = 0.95 in (2.42 cm)
| Length = 0.80 in (2.03 cm)
| Header = Design Resources
| Fritzing Part = {{reference:pmod:pmodad1:pmodad1.fzpz| }}
| 3D CAD file = {{reference:pmod:pmodad1:Pmodad1.zip|STP file}}
| Header = Documentation
| Primary IC = [[http://www.analog.com/media/cn/technical-documentation/evaluation-documentation/AD7476A_7477A_7478A.pdf | AD7476A]]
| Reference Manual = [[pmod/pmodad1/reference-manual]]
| Schematic = {{reference:pmod:pmodad1:pmodad1_sch.pdf| }}
| Header = Support
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-1x6.png?direct |}}
| Pin 1 = ~CS
| Pin 2 = D0
| Pin 3 = D1
| Pin 4 = SCLK
| Pin 5 = GND
| Pin 6 = VCC
| Header = J2 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-1x6-socket.png?direct |}}
| Pin 1 = A0
| Pin 2 = GND
| Pin 3 = A1
| Pin 4 = GND
| Pin 5 = GND
| Pin 6 = VCC
| Header = Product Compliance
| HTC = 8473301180
| ECCN = EAR99
}}

{{page>reference-manual}} \\ \\
 

===== Example Projects =====
==Microprocessor==
  * [[learn/software/tutorials/digilent-core-install/start | Installing the Digilent Core for Arduino]]
  * {{:reference:pmod:pmodad1:pmodad1-mpide.zip|Library and MPIDE Example}}
  * [[http://www.instructables.com/id/Lab-test-bench-oscilloscopewaveform/|Lab test bench-oscilloscope/waveform ]] - Community Project
  * [[https://www.hackster.io/mmigs/using-the-pmod-ad1-with-arduino-uno-38dd4a|Using the Pmod AD1 with Arduino Uno]] - Application note

==Programmable Logic==
  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]
    * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.

----

===== Additional Resources =====
  * [[https://wiki.analog.com/resources/fpga/xilinx/pmod/adxl362|ZedBoard Demo Project]]
  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}

----

{{tag>pmod pmod-start pmod-spi pmodad1 adc resource-center}}