~~NOTOC~~ 
       
====== Pmod ACL ======

{{Digilent Infobox
| Store Page = https://digilent.com/shop/pmod-acl-3-axis-accelerometer/
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/7-add-on-boards/
| Title = Pmod ACL
| Subtitle = 3-Axis Digital Accelerometer
| Header = Features
| Bullet = Activity/inactivity monitoring
| Bullet = Single or double tap detection
| Bullet = User Selectable Resolution
| Bullet = Free fall detection
| Bullet = Follows the Digilent {{/reference/pmod/digilent-pmod-interface-specification.pdf |Pmod Interface Specification}}
| Header = Key Specifications
| Range = ±2/4/8/16g
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/i2c/start | I²C]] - [[learn/fundamentals/communication-protocols/spi/start | SPI]]
| Specification Version = 1.3.0
| Logic Level = 3.3V
| Header = Physical
| Width = 1.0 in (2.54 cm)
| Length = 0.80 in (2.03 cm)
| Header = Design Resources
| Fritzing Part = {{reference:pmod:pmodacl:pmodacl.fzpz| Fritzing File}}
| 3D CAD Model = {{reference:pmod:pmodacl:PmodACL-STP.zip| STP Model}}
| Header = Documentation
| Primary IC = [[http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL345.pdf | ADXL345]]
| Reference Manual = [[pmod/pmodacl/reference-manual]]
| Schematic = {{reference:pmod:pmodacl:pmodacl_sch.pdf| }}
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-2x6.png?direct |}}
| Pin 1 = ~CS
| Pin 2 = MOSI
| Pin 3 = MISO
| Pin 4 = SCLK
| Pin 5 = GND
| Pin 6 = VCC
| Pin 7 = INT2
| Pin 8 = INT1
| Pin 9 = NC
| Pin 10 = NC
| Pin 11 = GND
| Pin 12 = VCC
|Header = J2 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-2x4-top-vertical.png?direct |}}
| Pin 1/5 = SCL
| Pin 2/6 = SDA
| Pin 3/7 = GND
| Pin 4/8 = VCC
}}

{{page>reference-manual}} \\ \\
 
===== Example Projects =====
== Microprocessor==
  * [[learn/software/tutorials/digilent-core-install/start | Installing the Digilent Core for Arduino]]
  * {{:reference:pmod:pmodacl:pmodacl-mpide-basic.zip|Library and MPIDE Basic Example}}
  * {{:reference:pmod:pmodacl:pmodacl-mpide-advanced.zip|Library and MPIDE Advanced Example}}
  * [[http://www.instructables.com/id/Auto-balancing-table-1/?ALLSTEPS|Auto-balancing Table]] - Community Project
  * [[http://www.instructables.com/id/Building-Jousting-Robots/|Building Jousting Robots]] - Community Project
  * [[http://www.instructables.com/id/Health-and-Security-Cloud-System-Digilent-Design-C/|Health and Security Cloud System]] - Community Project
  * [[http://www.instructables.com/id/Plug-and-Play-Pmods-Using-LabVIEW/step4/LabVIEW-Code/|Plug and Play Pmods Using LabVIEW]] - Community Project
  * [[http://www.instructables.com/id/Simple-Accelerometer-In-labVIEW/|Simple Accelerometer In LabVIEW]] - Community Project
  * [[http://www.instructables.com/id/Pmod-Racing-Ruler/|Racing Ruler]] - Community Project
  * [[http://www.instructables.com/id/Filtering-Accelerometer-Noise-In-labVIEW/|Filtering Accelerometer Noise In labVIEW]] - Community Project
  * [[http://www.instructables.com/id/Plotting-2d-and-3d-g-force-vectors-in-labVIEW/?ALLSTEPS|Plotting 2D and 3D g-force vectors in LabVIEW]] - Community Project
  * [[http://www.instructables.com/id/Stationary-Accelerometer-Tilt-Sensor/step2/Why-are-the-readings-bad-during-motion/|Stationary Accelerometer Tilt Sensor]] - Community Project
  * [[https://www.hackster.io/mmigs/using-the-pmod-acl-with-arduino-uno-35d564|Using the Pmod ACL with Arduino Uno]] - Application note
== Programmable Logic==
  * {{:reference:pmod:pmodacl:pmodacl-verilog-nexys3.zip|Nexys 3 Verilog Example - ISE 14.2}}
  * {{:reference:pmod:pmodacl:pmodacl-vhdl-nexys3.zip|Nexys 3 VHDL Example - ISE 14.2}}
  * [[http://www.instructables.com/id/Sounding-Rocket-Avionics-With-FPGA/|Sounding Rocket Avionics with FPGA]] - Community Project
  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]
     * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.

----

===== Additional Resources =====
  * [[https://wiki.analog.com/resources/fpga/xilinx/pmod/adxl345#required_software|ZedBoard Demo Project]]
  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}

----

{{tag>pmod pmod-start pmod-spi pmod-i2c pmodacl accelerometer resource-center}}