~~NOTOC~~ 
   
====== Pmod 8LD  ======
   
{{Digilent Infobox
| Store Page = https://digilent.com/shop/pmod-8ld-eight-high-brightness-leds/
| Manual = [[reference-manual]]
| Support = https://forum.digilent.com/forum/7-add-on-boards/
| Title = Pmod 8LD
| Subtitle = Eight High-brightness LEDs
| Header = Features
| Bullet = Eight high-brightness green LEDs
| Bullet = Uses BJTs for low power logic level control
| Bullet = 2×6-pin Pmod port with GPIO interface
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/gpio/start | GPIO]]
| Specification Version = 1.3.0
| Logic Level = 3.3V
| Header = Physical
| Width = 1.1 in (2.79 cm)
| Length = 0.80 in (2.03 cm)
| Header = Design Resources
| Fritzing Part = {{pmod8ld.fzpz| }}
| Header = Documentation
| Reference Manual = [[pmod/pmod8ld/reference-manual]]
| Schematic = {{pmod8ld_sch.pdf| }}
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-2x6.png?direct |}}
| Pin 1 = LD0
| Pin 2 = LD1
| Pin 3 = LD2
| Pin 4 = LD3
| Pin 5 = GND
| Pin 6 = VCC
| Pin 7 = LD4
| Pin 8 = LD5
| Pin 9 = LD6
| Pin 10 = LD7
| Pin 11 = GND
| Pin 12 = VCC
}}

{{page>reference-manual}} \\ \\
 

===== Example Projects =====
{{topic>pmod8ld +project}}
  * {{:reference:pmod:pmod8ld:pmod_eightled_library_and_demo.zip|Library and Example Code}}

== Microprocessor==
  * [[learn/software/tutorials/digilent-core-install/start | Installing the Digilent Core for Arduino]]
  * [[https://www.hackster.io/mmigs/using-the-pmod-8ld-with-arduino-uno-f257c9|Using the Pmod 8LD with Arduino Uno]] - Application note

==Programmable Logic==
  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]
    * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.


----

===== Additional Resources =====
  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}

----

{{tag>pmod pmod-start pmod-gpio pmod8ld high-brightness leds resource-center}}