====== myProto Accessory Board for myDAQ & myRIO ======
{{:ni:myproto-top-600.png?nolink&200|}}


===== Overview =====

The Digilent myProto accessory board for NI myDAQ attaches directly to the myDAQ and brings all myDAQ signals to breadboard connections where they can be easily accessed using simple jumper wires. The myProto also includes several additional useful I/O devices. Signal names on the myProto breadboards indicate which myDAQ signals and onboard devices are attached to which breadboard pins. All Ground connections on the myProto breadboards are connected into a single Ground node on the myProto device.

Features:

  * SOlderless Breadboard
  * All myDAQ signals accessible from breadboards
  * 3 onboard user LEDs
  * 1 10k potentiometer
  * 2 Audio Jacks
  * External power connector for breadboard circuits
  * Switches on all power supplies
  * Uses the [[http://zone.ni.com/reference/en-XX/help/373925A-01/myriohelp/myrio_connector_pinouts/| Mini System Port (MSP) connector]]

**Pin Connections**
^ Pin ^ Function ^
|AJ1 S1| Audio Jack 1 Sleeve |
|AJ1 T1| Audio Jack 1 Tip |
|AJ1 R1| Audio Jack 1 Ring |
|PWR +15V| myDAQ +15V supply |
|PWR -15V| myDAQ -15V supply |
|AJ2 S2| Audio Jack 2 Sleeve |
|DIG GND| Digital GND |
|DIG DIO0| Digital I/O 0 |
|DIG DIO1| Digital I/O 1 |
|DIG DIO2| Digital I/O 2 |
|DIG DIO3| Digital I/O 3 |
|AJ2 T2| Audio Jack 2 Tip |
|AJ2 R2| Audio Jack 2 Ring |
|PWR 5V| myDAQ +5V supply |
|PWR GND| Ground |
|PWR Vext| From Vext Jack |
|AO GND| Ground |
|AO 0| Analog Out Pin 0 |
|DIG DIO4| Digital I/O 4 |
|DIG DIO5| Digital I/O 5 |
|DIG DIO6| Digital I/O 6 |
|DIG DIO7| Digital I/O 7 |
|LED G| Green LED |
|AO 1| Analog Out Pin 1|
|AI0 GND| Analog In Ground|
|AI0 0+| Analog In Ch0+ |
|AI0 0-| Analog In Ch0- |
|AI1 GND| Analog In Ground |
|AI1 1+| Analog In Ch1+ |
|AI1 1-| Analog In Ch1- |
|LED Y| Yellow LED |
|LED R| Red LED |
|Pot CCW| Pot Counter-CW |
|Pot Wiper| Pot Wiper |
|Pot CW| Pot CW |

Please visit the [[http://www.ni.com/mydaq/| myDAQ]] page at National Instruments for more information about the myDAQ