{"id":31358,"date":"2025-05-28T10:05:43","date_gmt":"2025-05-28T17:05:43","guid":{"rendered":"https:\/\/digilent.com\/blog\/?p=31358"},"modified":"2025-05-29T11:30:44","modified_gmt":"2025-05-29T18:30:44","slug":"measuring-dc-motor-torque-and-speed-a-supercapacitor-powered-experiment-with-ad3","status":"publish","type":"post","link":"https:\/\/digilent.com\/blog\/measuring-dc-motor-torque-and-speed-a-supercapacitor-powered-experiment-with-ad3\/","title":{"rendered":"Measuring DC Motor Torque and Speed: A Supercapacitor-Powered Experiment with AD3"},"content":{"rendered":"<p>Hi there Digilent Blog readers! I\u2019m Dr. Brian Faulkner, professor of Electrical Engineering at Milwaukee School of Engineering in Milwaukee, Wisconsin, USA, where I teach introductory circuit theory and power systems engineering.\u00a0<a href=\"https:\/\/digilent.com\/shop\/analog-discovery-3\/\">The Analog Discovery 3<\/a>\u00a0is a wallet-sized powerhouse and I\u2019m a huge fanboy. This experiment is about a tactile exploration of the torque, speed, voltage, and current of electrical machines. I had learned \u201ctorque is a constant time current, speed is a constant times voltage\u201d on the blackboard before, but the kinesthetic understanding you get from feeling torque and speed with your own hands is so much better. And the Analog Discovery 3 gives us the perfect platform to explore this phenomenon.<\/p>\n<h2>Equipment:<\/h2>\n<h4>Geared PMDC Machine<\/h4>\n<p>A geared brushed permanent magnet DC motor is the star of our show today. These are the same ones you can get from simple robotics kits. You need one with gearing, so that human-producible speeds can result in significant voltages.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig1a_motor.png\" alt=\"\" width=\"260\" height=\"192\" class=\"alignnone wp-image-31493\" \/> <img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig1b_motor_model.png\" alt=\"\" width=\"300\" height=\"148\" class=\"alignnone wp-image-31494\" \/><\/p>\n<p><em>Figure 1: PMDC machine physical hardware, schematic symbol, and model<\/em><\/p>\n<ul>\n<li>Brushed permanent magnet machines can act as a motor <em>or as generator<\/em>.<\/li>\n<li>Faster spinning = more volts. Direction of rotation changes polarity of voltage<\/li>\n<li>Stronger turning = more amps. Direction of current determines direction of torque.<\/li>\n<\/ul>\n<p>&nbsp;<\/p>\n<h4>A Supercapacitor<\/h4>\n<p>Unlike regular capacitors, which are firmly in the \u201cboring passives\u201d category, supercapacitors are interesting because they can store enough energy to interact with electro-mechanical devices. They\u2019re like 2$ on Digikey right now. Have some fun and buy a few. Their stored energy and output current are high enough to weld your jumpers together if you aren\u2019t careful.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig2a_supercap.png\" alt=\"\" width=\"240\" height=\"235\" class=\"alignnone size-full wp-image-31495\" \/><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig2b_supercap_symbol.png\" alt=\"\" width=\"340\" height=\"130\" class=\"alignnone wp-image-31496\" \/><\/p>\n<p><em>Figure 2: Supercapacitor capacitor photo and schematic symbol<\/em><\/p>\n<ul>\n<li>Supercapacitors are polarized. The extra electrons MUST go on the (-) side indicated by the stripe on the side. Reverse polarity will electrochemically damage the capacitor.<\/li>\n<li>Supercapacitors have very large capacitance, so large currents for a long time are required to bring them up to full operating voltage.<\/li>\n<li>I\u2019m using 1 farad, but a half farad would still work. One millifarad will NOT store enough energy to be impressive. You need a proper supercapacitor.<\/li>\n<\/ul>\n<h4>An LED<\/h4>\n<p>It\u2019s a diode. It emits light. I personally like the super-bright outdoor sign LEDs from CREE but any LED will work fine<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig3a_LED.png\" alt=\"\" width=\"340\" height=\"101\" class=\"alignnone wp-image-31504\" \/><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/LED-figure.png\" alt=\"\" width=\"229\" height=\"126\" class=\"alignnone size-full wp-image-31508\" \/><\/p>\n<p><em>Figure 3: An LED<\/em><\/p>\n<ul>\n<li>I\u2019m using red, but any color is fine.<\/li>\n<li>We\u2019re just going to use this as a more-fun voltage detector. When the generator makes enough voltage to turn the LED on, it will glow, but it requires very little current so it doesn\u2019t disturb the rest of things by very much.<\/li>\n<\/ul>\n<h4>Some resistors<\/h4>\n<p>Resistors are boring passives, but reliably so. You always know exactly the nothing that they will do.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig4_resistors.png\" alt=\"\" width=\"340\" height=\"255\" class=\"alignnone wp-image-31507\" \/><\/p>\n<p><em>Figure 4: Resistors. Yup they\u2019re resistors all right. That\u2019s pretty much it.<\/em><\/p>\n<ul>\n<li>The little 10 ohm will be used as a current sense resistor for time-varying currents.<\/li>\n<li>The 330 will protect the LED from overvoltage by limiting current.<\/li>\n<li>The currents we\u2019re working with are modest, \u00bc watt through-hole resistors work fine.<\/li>\n<\/ul>\n<h4>An Analog Discovery 3 or Analog Discovery 2<\/h4>\n<p>I have enormous enthusiasm for this platform as expressed in my previous blog post <a href=\"https:\/\/digilent.com\/blog\/ignite-a-neon-lamp-using-the-analog-discovery-3\/\">https:\/\/digilent.com\/blog\/ignite-a-neon-lamp-using-the-analog-discovery-3\/<\/a> . It\u2019s just very flexible and very portable.<\/p>\n<ul>\n<li>Have the Waveforms software installed, plus a breadboard and jumper wires.<\/li>\n<li>We will only be using the oscilloscope function on low voltages today, none of the power supply functions.<\/li>\n<li>None of the improved specs of the Analog Discovery 3 over the Analog Discovery 2 matter in this experiment. I will be showing the 3 in the photos of my breadboard setup.<\/li>\n<\/ul>\n<figure id=\"attachment_31511\" aria-describedby=\"caption-attachment-31511\" style=\"width: 380px\" class=\"wp-caption alignnone\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig5_AD3andAD2.png\" alt=\"\" width=\"380\" height=\"266\" class=\"wp-image-31511\" \/><figcaption id=\"caption-attachment-31511\" class=\"wp-caption-text\"><em>Figure 5: The back-jeans-pocket sized powerhouse<\/em><\/figcaption><\/figure>\n<p>&nbsp;<\/p>\n<h2>Guide<\/h2>\n<h4>1. Spin faster to get more volts<\/h4>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig6a_Open_circuit_voltage.png\" alt=\"\" width=\"340\" height=\"232\" class=\"alignnone wp-image-31512\" srcset=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig6a_Open_circuit_voltage.png 455w, https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig6a_Open_circuit_voltage-135x93.png 135w\" sizes=\"auto, (max-width: 340px) 100vw, 340px\" \/><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig6b_motor_OCV_photo.png\" alt=\"\" width=\"320\" height=\"240\" class=\"alignnone wp-image-31513\" \/><\/p>\n<p><em>Figure 6: Open circuit voltage measurement<\/em><\/p>\n<ul>\n<li>Connect channel 1 of the oscilloscope to the machine as shown in Figure 6 and connect the other end to ground.<\/li>\n<li>Click Mode-&gt;screen to set the oscilloscope to live rolling display mode. Set the time base to 1 s\/div. This is a slow, human-reaction time scale experiment.<\/li>\n<li>Hold the machine so that you can comfortably rotate the shaft wheel. Rotate the drive shaft with your fingers. You should measure a voltage on the scope like that in Figure 7.<\/li>\n<li>Speed up to about one cycle per second. This should produce a positive DC voltage of about 6 V, with a lot of AC ripple riding on it as shown in Figure 7 and Video 1. This ripple is due to the commutator brushes inside the machine. The Analog Discovery 3 has hardware filtering for noise, but we don\u2019t need that for this experiment.<\/li>\n<li>The voltage measured should be <strong>positive<\/strong>. If the measured voltage is negative, swap the leads of the machine so that the comfortable spin direction will produce positive voltage.<\/li>\n<li>Make note qualitatively of how hard the shaft is to spin. This is the friction torque with no electrical load.<\/li>\n<\/ul>\n<p>.<img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig7_no_load_voltage_waveform.png\" alt=\"\" width=\"380\" height=\"408\" class=\"alignnone wp-image-31515\" \/><\/p>\n<p><em>Figure 7 :Typical generating voltage waveform with no load<\/em><\/p>\n<div style=\"width: 735px;\" class=\"wp-video\"><video class=\"wp-video-shortcode\" id=\"video-31358-1\" width=\"735\" height=\"413\" preload=\"metadata\" controls=\"controls\"><source type=\"video\/mp4\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/v1-spin-faster-get-more-volts-1.mp4?_=1\" \/><a href=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/v1-spin-faster-get-more-volts-1.mp4\">https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/v1-spin-faster-get-more-volts-1.mp4<\/a><\/video><\/div>\n<p><em>Video 1: Spin faster, get more volts<\/em><\/p>\n<h4>2. You are the prime mover &#8211; You are the energy source<\/h4>\n<p>We are not using the Analog Discovery\u2019s power supply. We are the power supply, our hands provide mechanical energy, which the machine converts into electrical energy, which the LED converts into light energy.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig8_LED_drive.png\" alt=\"\" width=\"380\" height=\"202\" class=\"alignnone wp-image-31518\" srcset=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig8_LED_drive.png 807w, https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig8_LED_drive-600x319.png 600w\" sizes=\"auto, (max-width: 380px) 100vw, 380px\" \/><\/p>\n<p><em>Figure 8: Driving an LED<\/em><\/p>\n<ul>\n<li>Add a 10 resistor, LED, and 330 \u00a0\u00a0to the circuit as shown in Figure 8.<\/li>\n<li>Channel 2\u2019s connection measures time-varying current using the 10 sense resistor and labels the machine in the passive sign convention. When current is negative, the machine acts as a generator, converting mechanical energy into electrical energy. When current is positive, the machine acts as a motor.<\/li>\n<li>Spin the shaft fast enough to cause the LED to light up. The faster you spin, the higher the voltage and the brighter the light. It should feel just a little bit harder to spin than in the no load case, since the LED is a low-current load (10 &#8211; 20 mA).<\/li>\n<li>The waveform observed should resemble the one in Figure 9 and Video 2.<\/li>\n<\/ul>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig9_led_current_waveform.png\" alt=\"\" width=\"380\" height=\"408\" class=\"alignnone wp-image-31519\" \/><\/p>\n<p><em>Figure 9: Current waveform driving an LED at about 10 mA<\/em><\/p>\n<div style=\"width: 735px;\" class=\"wp-video\"><video class=\"wp-video-shortcode\" id=\"video-31358-2\" width=\"735\" height=\"413\" preload=\"metadata\" controls=\"controls\"><source type=\"video\/mp4\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/v2-Powering-LED-Video.mp4?_=2\" \/><a href=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/v2-Powering-LED-Video.mp4\">https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/v2-Powering-LED-Video.mp4<\/a><\/video><\/div>\n<p><em>Video 2: Powering an LED with the DC machine as generator<\/em><\/p>\n<p><strong>\u00a0<\/strong><\/p>\n<h4>4. Drive a short circuit<\/h4>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig10_short_circuit_test.png\" alt=\"\" width=\"380\" height=\"173\" class=\"alignnone wp-image-31522\" srcset=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig10_short_circuit_test.png 867w, https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig10_short_circuit_test-600x273.png 600w\" sizes=\"auto, (max-width: 380px) 100vw, 380px\" \/><\/p>\n<p><em>Figure 10: Short-circuit test<\/em><\/p>\n<ul>\n<li>Add a short-circuit jumper wire between the positive terminal and ground as shown in Figure 10.<\/li>\n<li>Spin the drive shaft. The wheel will be much harder to spin! Minimum resistance-&gt; maximum current -&gt; maximum torque!<\/li>\n<li>You will see a waveform like the one in Figure 11. The output voltage is (nearly) zero and the output current is much larger, hundreds of mA.<\/li>\n<\/ul>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig11_short_circuit_current_waveform.png\" alt=\"\" width=\"340\" height=\"431\" class=\"alignnone wp-image-31523\" \/><\/p>\n<p><em>Figure 11: Short circuit current is very large compared to the LED current<\/em><\/p>\n<h4>5. Charge a supercapacitor with your own hands<\/h4>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig12_supercapacitor_drive.png\" alt=\"\" width=\"380\" height=\"157\" class=\"alignnone wp-image-31524\" srcset=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig12_supercapacitor_drive.png 979w, https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig12_supercapacitor_drive-600x248.png 600w\" sizes=\"auto, (max-width: 380px) 100vw, 380px\" \/><\/p>\n<p><em>Figure 12: Charging a supercapacitor. Seriously don\u2019t put the cap in backwards. I mean it.<\/em><\/p>\n<ul>\n<li>Replace the short circuit wire with the supercapacitor as shown in Figure 12.<\/li>\n<li>Double check that the (\u2013) side of the capacitor is to ground! Don\u2019t ruin your supercapacitor with reverse voltage.<\/li>\n<li>Spin the drive shaft. It will be difficult like the short circuit, but slowly get easier as the capacitor voltage rises. The waveform should resemble that in Figure 13.<\/li>\n<li>Continue spinning the drive shaft until the measured voltage reaches 5 V.<\/li>\n<\/ul>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig13_capacitor_charging_waveforms.png\" alt=\"\" width=\"380\" height=\"432\" class=\"alignnone wp-image-31525\" \/><\/p>\n<p><em>Figure 13: Capacitor charging waveform has wiggles because my hand is stronger on the downward stroke than on the upward stroke.<\/em><\/p>\n<p>&nbsp;<\/p>\n<h4>6. Let go of the drive shaft to operate the machine as a motor<\/h4>\n<p>In the previous step, the machine acted as the source, providing energy and the supercapacitor acted as the load, absorbing energy. Now they will swap roles.<\/p>\n<ul>\n<li>When the voltage reaches 5 V, let go of the machine\u2019s shaft.<\/li>\n<li>The wheel will continue to spin in the same direction, but the current will swap sign! The supercapacitor is now the source, and the machine is now the load: it is now a motor, not a generator. There\u2019s no power supply in the circuit; the supercapacitor has become the energy source now.<\/li>\n<li>Current will be nearly constant to overcome sliding friction in the motor, and capacitor voltage decreases linearly with time as shown in Figure 14 and Video 3.<\/li>\n<li>Apply a small mechanical load of friction torque to the wheel with your fingers. The machine will slow down and the current will rise slightly.<\/li>\n<li>Grab the wheel firmly and prevent the machine from rotating. The machine current will spike sharply, then decrease exponentially. This is the capacitor discharging through the copper windings of the machine.<\/li>\n<\/ul>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig14_motoring_waveform_with_locked_rotor.png\" alt=\"\" width=\"380\" height=\"226\" class=\"alignnone wp-image-31526\" srcset=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig14_motoring_waveform_with_locked_rotor.png 709w, https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig14_motoring_waveform_with_locked_rotor-600x356.png 600w\" sizes=\"auto, (max-width: 380px) 100vw, 380px\" \/><\/p>\n<p><em>Figure 14: Negative current when generating, positive current when motoring, and then huge current under locked-rotor conditions.<\/em><\/p>\n<div style=\"width: 735px;\" class=\"wp-video\"><video class=\"wp-video-shortcode\" id=\"video-31358-3\" width=\"735\" height=\"413\" preload=\"metadata\" controls=\"controls\"><source type=\"video\/mp4\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/v3-Motor-Supercapacitor-transien.mp4?_=3\" \/><a href=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/v3-Motor-Supercapacitor-transien.mp4\">https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/v3-Motor-Supercapacitor-transien.mp4<\/a><\/video><\/div>\n<p><em>Video 3: Supercapacitor transient here<\/em><\/p>\n<ul>\n<li>We can see the power of the machine more directly by using one of the math channel options. Click Options-&gt;Add Channel -&gt; Custom (software) to open up a new math channel. Multiply the voltage from channel 1 with C2\/10 (the current) to get the power. Set units to watts as shown in Figure 15It\u2019s technically the total power of the machine and the sense resistor, but we\u2019ll ignore that small difference.<\/li>\n<li>The power channel will show a trace much like Figure 16.<\/li>\n<\/ul>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig15a_add_channel.png\" alt=\"\" width=\"240\" height=\"243\" class=\"alignnone wp-image-31527\" \/><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig15b_programming_channel.png\" alt=\"\" width=\"240\" height=\"279\" class=\"alignnone wp-image-31528\" \/><\/p>\n<p><em>Figure 15: Adding a power channel<\/em><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/fig16_power_channel_display.png\" alt=\"\" width=\"380\" height=\"329\" class=\"alignnone wp-image-31529\" \/><\/p>\n<p><em>Figure 16: Power channel display directly in watts<\/em><\/p>\n<h4>Electromechanical energy conversion rocks<\/h4>\n<p>Well that was fun! I find this experiment to be the best way to really understand, in a kinesthetic way, the torque\/speed\/voltage\/current relationship in DC machines. This experiment also makes the passive sign convention really \u201cpop\u201d. The fact that the same machine can act as both motor and generator is easier to believe when you feel it with your own hands.<\/p>\n<p>To the professors in the audience: I\u2019ve rewritten all my circuit labs here at MSOE all around the Analog Discovery 2. All 30ish of them are compatible with the new\u00a0<a href=\"https:\/\/digilent.com\/shop\/analog-discovery-3\/\">Analog Discovery 3<\/a>\u00a0and feature at least one sensor or transducer. If you are looking for circuits lab experiments that don\u2019t put your students to sleep, drop me an email (faulkner@msoe.edu). Taking circuit theory isn\u2019t the price of admission to interesting subjects like controls and instrumentation, it can be fun on its own, and it\u00a0<em>should<\/em>\u00a0be fun.<\/p>\n<p>&nbsp;<\/p>\n<div class='watch-action'><div class='watch-position align-left'><div class='action-like'><a class='lbg-style6 like-31358 jlk' data-task='like' data-post_id='31358' data-nonce='5286a1c13f' rel='nofollow'><img src='https:\/\/digilent.com\/blog\/wp-content\/plugins\/wti-like-post-pro\/images\/pixel.gif' title='Like' \/><span class='lc-31358 lc'>0<\/span><\/a><\/div><div class='action-unlike'><a class='unlbg-style6 unlike-31358 jlk' data-task='unlike' data-post_id='31358' data-nonce='5286a1c13f' rel='nofollow'><img src='https:\/\/digilent.com\/blog\/wp-content\/plugins\/wti-like-post-pro\/images\/pixel.gif' title='Unlike' \/><span class='unlc-31358 unlc'>0<\/span><\/a><\/div><\/div> <div class='status-31358 status align-left'>Be the 1st to vote.<\/div><\/div><div class='wti-clear'><\/div>","protected":false},"excerpt":{"rendered":"<p>Hi there Digilent Blog readers! I\u2019m Dr. Brian Faulkner, professor of Electrical Engineering at Milwaukee School of Engineering in Milwaukee, Wisconsin, USA, where I teach introductory circuit theory and power &hellip; <\/p>\n","protected":false},"author":47,"featured_media":31531,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[18,20,1563,4326],"tags":[4342,4432,1736,4433,5153,4416,5155,4448,1452,4565,5152,5151,5154,452],"ppma_author":[4569],"class_list":["post-31358","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-academia","category-products","category-guide","category-teaching-training","tag-ad2","tag-ad3","tag-analog-discovery-2","tag-analog-discovery-3","tag-capacitor","tag-current","tag-dc-machines","tag-education","tag-guide","tag-resistors","tag-short-circuit","tag-supercapacitor","tag-torque","tag-waveforms"],"jetpack_featured_media_url":"https:\/\/digilent.com\/blog\/wp-content\/uploads\/2025\/05\/MeasuringDCMotorTorqueSpeed-735x400-1.png","jetpack_sharing_enabled":true,"authors":[{"term_id":4569,"user_id":0,"is_guest":1,"slug":"dr-brian-faulkner","display_name":"Brian Faulkner","avatar_url":"https:\/\/secure.gravatar.com\/avatar\/?s=96&d=mm&r=g","1":"","2":"","3":"","4":"","5":"","6":"","7":"","8":"","9":"","10":""}],"post_mailing_queue_ids":[],"_links":{"self":[{"href":"https:\/\/digilent.com\/blog\/wp-json\/wp\/v2\/posts\/31358","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/digilent.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/digilent.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/digilent.com\/blog\/wp-json\/wp\/v2\/users\/47"}],"replies":[{"embeddable":true,"href":"https:\/\/digilent.com\/blog\/wp-json\/wp\/v2\/comments?post=31358"}],"version-history":[{"count":18,"href":"https:\/\/digilent.com\/blog\/wp-json\/wp\/v2\/posts\/31358\/revisions"}],"predecessor-version":[{"id":31548,"href":"https:\/\/digilent.com\/blog\/wp-json\/wp\/v2\/posts\/31358\/revisions\/31548"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/digilent.com\/blog\/wp-json\/wp\/v2\/media\/31531"}],"wp:attachment":[{"href":"https:\/\/digilent.com\/blog\/wp-json\/wp\/v2\/media?parent=31358"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/digilent.com\/blog\/wp-json\/wp\/v2\/categories?post=31358"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/digilent.com\/blog\/wp-json\/wp\/v2\/tags?post=31358"},{"taxonomy":"author","embeddable":true,"href":"https:\/\/digilent.com\/blog\/wp-json\/wp\/v2\/ppma_author?post=31358"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}